Home > Swing Hardware >

3 1/2" Cast Iron Swing Hanger w Clevis
3 1/2" Cast Iron Swing Hanger - Clevis
3 1/2" Cast Iron Swing Hanger With Clevis Connector

3 1/2" Cast Iron Swing Hanger W/ Clevis

Questions - 888.760.2499

Ships UPS/ FedEx Ground


Availability: Usually Ships in 1 to 2 Business Days
Product Code: JENS-SH124


3 1/2" Cast Iron Swing Hanger With Clevis

This is a Cast Iron, Galvanized Swing Hanger with a Clevis Connector for easy attaching of swing chain to the hanger. It is designed to fit overhead swing sets using a 3 1/2" pipe and are cast in two halves. The lower half of the swing hanger body has a shackle pendulum with a sintered bronze bearing incorporated into it to reduce wear. These bearings do not need to be oiled as the bronze is impregnated with oil. The pendulum is 1” wide and has a shackle with bolt so that there is no need for a connecting S-hook. The shackle pendulum is tamper resistant. It requires an allen wrench with a special pin hole head. The two halves of the hangers are bolted together with a 12mm carriage bolt and a hex lock tight nut. The pendulum is held to the hanger with a #12 axle bolt with a long shoulder, so the bearing does not ride on the threads. It also has a lock tight nut. This hanger fits a standard schedule 40 two inch pipe. This product should last 2 years in harsh conditions and up to 5 years in optimal conditions. Some conditions may require replacement sooner. Tensile strength is 5000 lbs. Sold as each

Average Rating: 5 of 5 Total Reviews: 1 Write a review »

  0 of 0 people found the following review helpful:
hangers for huge top rail September 8, 2015
Reviewer: Philip Elliott from Columbia , MO United States  
fit 3 1/2" top rail great.  also elimenates the need for a s-hook

Was this review helpful to you?