Home > Swing Hardware >

2 3/8" Cast Iron Swing Hanger - Clevis
2 3/8" Cast Iron Swing Hanger with Clevis
2 3/8" Cast Iron Swing Hanger With Clevis

2 3/8" Cast Iron Swing Hanger

Questions - 888.760.2499

Ships UPS/ FedEx Ground


Availability: Usually Ships in 3 to 5 Days
Product Code: JENS-SH114

Description Installation/ Specifications

2 3/8" Cast Iron Swing Hanger with Clevis Connector

This is a galvanized ductile cast iron Swing Hanger engineered to fit 2 3/8" overhead pipe and is complete with a Clevis Connector. These Swing Hangers are cast in two halves. The lower half of the swing hanger body has a shackle pendulum with a sintered bronze bearing incorporated into it to reduce wear. These bearings do not need to be oiled as the bronze is impregnated with oil. The pendulum is 1” wide and has a shackle with bolt so that there is no need for a connecting S-hook. The shackle pendulum is tamper resistant. It requires an allen wrench with a special pin hole head. The two halves of the hangers are bolted together with a 12mm carriage bolt and a hex lock tight nut. The pendulum is held to the hanger with a #12 axle bolt with a long shoulder, so the bearing does not ride on the threads. It also has a lock tight nut. This hanger fits a standard schedule 40 three inch pipe. This product should last 2 years in harsh conditions and up to 5 years in optimal conditions. Some conditions may require replacement sooner. Tensile strength is 5000 lbs. Sold as each.

    Share your knowledge of this product. Be the first to write a review »