Home > Swing Hardware >

1" Pendulum Swing Hanger With Clevis
1"Pendulum Swing Hanger With Clevis Connector
1" Pendulum Swing Hanger with Clevis Connector

1" Pendulum Swing Hanger W/ Clevis

Questions - 888.760.2499

Ships UPS/ FedEx Ground


Availability: Usually Ships in 2 to 3 Days
Product Code: JENS-SH167


1" Pendulum - Clevis Swing Hanger

This 1" Pendulum Swing Hanger with Clevis Connector will save the cost and hassle of installing an S-hook typically used to attach chains to swing hangers. Bolt pin has a tamper resistant head that requires an allen wrench with special hole to open and close. Can be used with any ductile iron or stamped steel hanger.  Uses 12mm bolt and nut.  This product should last 2 years in harsh conditions and up to 5 years in optimal conditions. Some conditions may require replacement sooner.  Tensile strength is 5000 lbs.  Sold as each.

Customers Also Purchased
Swing Hanger Bolt & Nut


Swing Hanger Bolt

    Share your knowledge of this product. Be the first to write a review »