Home > Fast Patch & Maxx Clear >

Maxx Clear Playground Surface Conditioner
Maxx Clear Surface Conditioner
Maxx Clear Playground Surface Conditioner

Alternative Views:

Maxx Clear Surface Conditioner

Questions - 888.760.2499

Ships UPS/ FedEx Ground


Availability: Usually Ships in 2 to 3 Days
Product Code: 1443-MAXX-CLEAR



Maxx Clear Playground Surface Conditioner

Maxx Clear Playground Surface Conditioner is available in either a revolutionary new water base formula or a solvent base formula is an absolute must for rubber playground surfaces or running tracks. Maxx Clear conditions, preserves and extends the life of poured-in-place rubber playground surfaces and running tracks.

"Much like waxing your car, periodic maintenance is required for preserving and extending the life of poured-in-place surfacing and rubber running track. Preserve and extend yours with Maxx Clear"

Here's a simple test: Scuff the rubber surface of either a playground or running track with your foot. Does the small particles of rubber come off? If it does, then your surface is granulating and soon will become unsafe. An unsafe play surface is a huge liability for the owner/ operator of the playground or running track. Maxx Clear will halt the surface granulation, extend the surface life and will make the colors pop once again. Maxx Clear is available in either a solvent based or a water base formula, both are safe for use under California's strict emission guidelines.

  • Maxx Clear H2O: Maxx Clear H2O is a revolutionary water base coating that is applied with an airless sprayer. Using an airless sprayer greatly reduces the time / labor required to apply Maxx Clear and clean up is safe and easy with soap and water... Better for the environment. Coverage using an airless sprayer and depending on surface condition can be as high as 600-650 sq ft per pail. Material cost per sq ft is +/- $0.75 per sq ft*.

  • Maxx Clear Solvent Base: Maxx Clear is much like the original binder used when the surface was installed, and needs to be applied using a roller with a 5/8" nap. It is a single component binder that required no mixing of a second component and is ready to use straight from the pail. Depending on surface condition, coverage is about 400 sq ft per pail. Clean up is with either mineral spirits or acetone. Material cost per sq ft is +/- $0.99 per sq ft.*

* Based on surface condition coverage per pail could increase or decrease

Average Rating: 5 of 5 Total Reviews: 1 Write a review »

  0 of 0 people found the following review helpful:
Poured Rubber - Sealing December 1, 2017
Reviewer: PRR Services from North and South Carolina  
The product was very easy to apply, coverage was great. Most importantly the results were superb and the customer was extremely satisfied! We are looking forward to many more long-term customers due to this product.

Was this review helpful to you?